Description: This point dataset documents sites with approved special use permits. Dataset could be used to spin-off other layers. For example, cell towers (CT) and land excavations (LE) are stand-a-lone maps generated from this layer.
Description: This dataset contains point features representing locations where permits have been issued for residential or commercial construction sourced from Permits Plus and Accela.
Description: This polyon dateset represents the geographic footprint of land subject to a zoning hearing, rezoning petition, or land development code variance.
Description: This polygon dataset contains current and adopted zoning districts for unincorporated portion of Hillsborough County. This data was created by combining and tracing polygons from the parcels as described in approved plan documents or legal descriptions for use in GIS systems for a variety of planning and analytical purposes. Data is updated by applying new approved plan documents or legal descriptions that change the zoning boundaries.This dataset may not reflect the current status of the zoning designations .
Description: In this project, the University of Florida (UF) GeoPlan Center is providing Geographic Information System (GIS) technical assistance for creating updated Florida statewide Ultimate Design Wind Speed line maps for the 8th Edition (2023) update to the Florida Building Code (FBC). Updates to Figures: 1609.3(1), 1609.3(2), 1609.3(3) and 1609.3(4) will be based on the standards set forth in Chapter 26 of the American Society of Civil Engineers (ASCE), the Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). In addition, the GeoPlan Center shall provide GIS technical assistance in preparing local wind speed line maps for each building code jurisdiction that is impacted and dissected by the wind speed contours as updated and depicted in the draft Florida Building Code, 8th Edition (2023) Figures 1609.3(1-4) Risk Categories I - IV Buildings and Structures. This final report addresses details of the project’s progress to date on each task listed in the scope of work. In summary, Task 1 is complete, and Task 2 is complete.Notes:1.Values are nominal design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10m) above ground for Exposure C Category.2.Linear interpolation between contours. Point values are provided to aid with interpolation.3.Islands, coastal areas, and land boundaries outside the last contour shall use the last wind speed contour.4.Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions.5.Wind speeds correspond to approximately a 15% probability of exceedance in 50 years (Annual Exceedance Probability = 0.00333, MRI = 300 Years).6.Location-specific basic wind speeds shall be permitted to be determined using www.atcouncil.org/windspeedUltimate Design Wind Speeds, Vult, For Risk Categories I-IV Buildings and Other Structureshttps://ufl.maps.arcgis.com/apps/mapviewer/index.html?webmap=3a5d5dd7d44744eeb9537b76534a72a9
Copyright Text: Hillsborough County, FL
University of Florida (UF) GeoPlan Center
Description: In this project, the University of Florida (UF) GeoPlan Center is providing Geographic Information System (GIS) technical assistance for creating updated Florida statewide Ultimate Design Wind Speed line maps for the 8th Edition (2023) update to the Florida Building Code (FBC). Updates to Figures: 1609.3(1), 1609.3(2), 1609.3(3) and 1609.3(4) will be based on the standards set forth in Chapter 26 of the American Society of Civil Engineers (ASCE), the Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). In addition, the GeoPlan Center shall provide GIS technical assistance in preparing local wind speed line maps for each building code jurisdiction that is impacted and dissected by the wind speed contours as updated and depicted in the draft Florida Building Code, 8th Edition (2023) Figures 1609.3(1-4) Risk Categories I - IV Buildings and Structures. This final report addresses details of the project’s progress to date on each task listed in the scope of work. In summary, Task 1 is complete, and Task 2 is complete.Notes:1.Values are nominal design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10m) above ground for Exposure C Category.2.Linear interpolation between contours. Point values are provided to aid with interpolation.3.Islands, coastal areas, and land boundaries outside the last contour shall use the last wind speed contour.4.Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions.5.Wind speeds correspond to approximately a 1.6% probability of exceedance in 50 years (Annual Exceedance Probability = 0.00033, MRI = 3000 Years).6.Location-specific basic wind speeds shall be permitted to be determined using www.atcouncil.org/windspeed.Ultimate Design Wind Speeds, Vult, For Risk Categories I-IV Buildings and Other Structureshttps://ufl.maps.arcgis.com/apps/mapviewer/index.html?webmap=3a5d5dd7d44744eeb9537b76534a72a9
Copyright Text: Hillsborough County, FL
University of Florida (UF) GeoPlan Center
Description: In this project, the University of Florida (UF) GeoPlan Center is providing Geographic Information System (GIS) technical assistance for creating updated Florida statewide Ultimate Design Wind Speed line maps for the 8th Edition (2023) update to the Florida Building Code (FBC). Updates to Figures: 1609.3(1), 1609.3(2), 1609.3(3) and 1609.3(4) will be based on the standards set forth in Chapter 26 of the American Society of Civil Engineers (ASCE), the Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). In addition, the GeoPlan Center shall provide GIS technical assistance in preparing local wind speed line maps for each building code jurisdiction that is impacted and dissected by the wind speed contours as updated and depicted in the draft Florida Building Code, 8th Edition (2023) Figures 1609.3(1-4) Risk Categories I - IV Buildings and Structures. This final report addresses details of the project’s progress to date on each task listed in the scope of work. In summary, Task 1 is complete, and Task 2 is complete.Notes:1.Values are nominal design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10m) above ground for Exposure C Category.2.Linear interpolation between contours. Point values are provided to aid with interpolation.3.Islands, coastal areas, and land boundaries outside the last contour shall use the last wind speed contour.4.Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions.5.Wind speeds correspond to approximately a 3% probability of exceedance in 50 years (Annual Exceedance Probability = 0.000588, MRI = 1700 Years).6.Location-specific basic wind speeds shall be permitted to be determined using www.atcouncil.org/windspeed.Ultimate Design Wind Speeds, Vult, For Risk Categories I-IV Buildings and Other Structureshttps://ufl.maps.arcgis.com/apps/mapviewer/index.html?webmap=3a5d5dd7d44744eeb9537b76534a72a9
Copyright Text: Hillsborough County, FL
University of Florida (UF) GeoPlan Center
Description: In this project, the University of Florida (UF) GeoPlan Center is providing Geographic Information System (GIS) technical assistance for creating updated Florida statewide Ultimate Design Wind Speed line maps for the 8th Edition (2023) update to the Florida Building Code (FBC). Updates to Figures: 1609.3(1), 1609.3(2), 1609.3(3) and 1609.3(4) will be based on the standards set forth in Chapter 26 of the American Society of Civil Engineers (ASCE), the Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). In addition, the GeoPlan Center shall provide GIS technical assistance in preparing local wind speed line maps for each building code jurisdiction that is impacted and dissected by the wind speed contours as updated and depicted in the draft Florida Building Code, 8th Edition (2023) Figures 1609.3(1-4) Risk Categories I - IV Buildings and Structures. This final report addresses details of the project’s progress to date on each task listed in the scope of work. In summary, Task 1 is complete, and Task 2 is complete.Notes:1.Values are nominal design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10m) above ground for Exposure C Category.2.Linear interpolation between contours. Point values are provided to aid with interpolation.3.Islands, coastal areas, and land boundaries outside the last contour shall use the last wind speed contour.4.Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions.5.Wind speeds correspond to approximately a 7% probability of exceedance in 50 years (Annual Exceedance Probability = 0.00143, MRI = 700 Years).6.Location-specific basic wind speeds shall be permitted to be determined using www.atcouncil.org/windspeed.Ultimate Design Wind Speeds, Vult, For Risk Categories I-IV Buildings and Other Structureshttps://ufl.maps.arcgis.com/apps/mapviewer/index.html?webmap=3a5d5dd7d44744eeb9537b76534a72a9
Copyright Text: Hillsborough County, FL
University of Florida (UF) GeoPlan Center
Description: The Unincorporated Hillsborough County Planning Areas are used by the Planners to track and identify Rezoning cases. These boundaries are shown on our Future Land Use map defining areas that are based on, but not exactly the same as, the Community Planning Areas.
Copyright Text: The Hillsborough County City-County Planning Commission and Metropolitan Planning Organization.
GIS Project Manager at cataniac@plancom.org
Description: The List is a component of Florida's Local Government Financial Reporting System, which is a network of state and local agencies working together to collect and provide financial and other information about Florida's local governments (counties, municipalities, and special districts). Members of the Florida Legislature, state agencies, constitutional officials, and others rely on this information to comply with their requirements. FloridaCommerce's responsibility is to collect and provide uniform, up-to-date, and accurate information about Florida's special districts.
Copyright Text: Hillsborough County Property Appraiser
Florida Commerce
Description: The DRI feature class consists of polygon boundaries of development of regional impact (DRI) in unincorporated Hillsborough County. This dataset may now be outdated and Hillsborough County no longer updates the GIS DRI boundaries.Pursuant to Section 380.06(1), Florida Statutes, a development of regional impact is "any development which, because of its character, magnitude, or location, would have a substantial effect upon the health, safety or welfare of citizens of more than one county." A Development of Regional Impact is determined in part based on the size of the development. Numerical thresholds for different types of development are identified in Section 380.0651, Florida Statutes, and Rule 28-24, Florida Administrative Code. There are 14 types of developments which may be DRIs if they exceed certain thresholds. The types of development include airports, hospitals, mines, hotels, marinas, industrial, office and retail uses, residential projects and multi-use developments. The types and numericals thresholds are identified in Section 380.0651, F.S., and Chapter 28-24, F.A.C.
Copyright Text: Geomatics Section, Hillsborough County
Description: This polygon dataset shows the boundaries for the Zoning Overlay Districts which are specially defined in the Land Development Code with additional conditions or constraints for proposed development beyond those stipulated by the principal Zoning District. This layer also includes other Special Zoning Districts, not called Overlay Districts, but which are principal Zoning Districts with location-based requirements.
Description: BOCC approved resolution on April 2016 for Mobility Fees. Responsible for the layer is the Mobility Fee administrator Ron Barnes with the assistance of John Patrick. Layer will be updated as when needed.
Description: This dataset contains polygon features representing parcels that abut landmarks—such as historic buildings, significant public sites, or cultural resources.
Description: The DRI feature class consists of polygon boundaries of development of regional impact (DRI) in unincorporated Hillsborough County. This dataset may now be outdated and Hillsborough County no longer updates the GIS DRI boundaries.Pursuant to Section 380.06(1), Florida Statutes, a development of regional impact is "any development which, because of its character, magnitude, or location, would have a substantial effect upon the health, safety or welfare of citizens of more than one county." A Development of Regional Impact is determined in part based on the size of the development. Numerical thresholds for different types of development are identified in Section 380.0651, Florida Statutes, and Rule 28-24, Florida Administrative Code. There are 14 types of developments which may be DRIs if they exceed certain thresholds. The types of development include airports, hospitals, mines, hotels, marinas, industrial, office and retail uses, residential projects and multi-use developments. The types and numerical thresholds are identified in Section 380.0651, F.S., and Chapter 28-24, F.A.C.
Copyright Text: Geomatics Section, Hillsborough County
Description: Assurance to a developer that upon receipt of his or her development permit or Brownfield designation he or she may proceed in accordance with existing laws and policies, subject to the conditions of a development agreement, strengthens the public planning process, encourages sound capital improvement planning and financing, assists in assuring there are adequate capital facilities for the development, encourages private participation in comprehensive planning, and reduces the economic costs of development.
Description: The List is a component of Florida's Local Government Financial Reporting System, which is a network of state and local agencies working together to collect and provide financial and other information about Florida's local governments (counties, municipalities, and special districts). Members of the Florida Legislature, state agencies, constitutional officials, and others rely on this information to comply with their requirements. FloridaCommerce's responsibility is to collect and provide uniform, up-to-date, and accurate information about Florida's special districts.
Copyright Text: Hillsborough County Property Appraiser
Florida Commerce
Description: This data set, CDBG, shows areas within the County that meet the criteria of the Community Development Block Group Grant Program, as authorized under Title 1 of the Housing and Community Development Act of 1974.